Description
- Fits for 47″-84″ Flat Panel TV
- VESA : 200×100 / 200×200 / 300×200 / 400×200 / 400×400 / 600x400mm
- Tilt: +5°/-15°
- Leveling adjustment: ±3°
- Swivel: ±45°
- Distance to the wall: 61-419mm (2.40-16.49″)
- Weight Capacity: 132 lbs (60KG)
UNIVERSAL DESIGN
This full motion TV mount fits for most of 47-84inch TVs up to 132lbs with VESA size 200*100mm to 600*400mm available and max 16″ Wood Stud space.
ADJUSTABLE VIEW COMFORTABLE
This TV bracket with dual articulating arms includes +5° /-15° tilt, ±45°swivel( maximum swivel angle depends on your TV), +/-3° post-installation adjustment allows the perfect TV leveling. All these will make your TV flexibility and better view based on your seat in the room.
EASY TO INSTALLATION
Easy installation with detailed instruction and all included hardware in pre-labeled bags(Remarks can help you distinguish which screw you should use). Warm tips: In order to avoid customer misusing concrete anchors onto wood studs or drywall directly causing any safety issues, we removed concrete anchors from our package. If you need 10X50mm concrete anchors , please contact us to get it which be sent from USA.
SAVING SPACE
This full motion TV wall bracket can pull out to 16.49 and retract back to 2.40”, which save some valuable space for you and make your house look neat and Max weight 132lbs.
PRODUCT INCLUDES
Comes with bubble level, 3 pieces pack of cable ties and all standard mounting hardware, 10-year friendly US-based customer service.
Additional Information
| VESA | 200x100mm, 200x200mm, 300x200mm, 400x200mm, 400x400mm, 600x400mm |
|---|---|
| Maximum Loading Weight (lbs) | 132 |
1299 reviews for XML008-K
Only logged in customers who have purchased this product may leave a review.
Travis –
LG 75′ above my fireplace looks awesome! The mount is extremely sturdy and I couldn’t be happier with the purchase. A lot of mounts similar i’ve seen at stores are twice the price of this one.
Randy, –
These are the best. I ordered three of them.One wall I had lay two 2X4’s between the studs. Cutting a standard “H” hole sliding the boards in. Reducing needed sheet rock.Three Of them installed in under an hour.These are awesome. ItAll three 65″ TVS worked out perfectly
Anno S. –
The packaging, contents, and installation instructions are very well done with everything you need for a quality installation, including a small level to get it perfect! The thing I found the most useful was the full-sized mounting template – although it is just a simple paper template, it really made the installation so much easier. Also, the mount provides alignment adjustments in all planes to get the TV perfectly square with the room once mounted – I’ve yet to find a ‘level’ and square room in my house so these adjustments take care of any alignment issues. Once installed, the TV move effortlessly to swing out and at any angle – the smoothest movement I’ve had compared to several other mounts I’ve installed. Definite value for money.
bltibbs –
No complaints at all. Installed relatively easy and seems very sturdy. Hardest part was finding the studs. They provided way more hardware than anyone would need trying to cover the bases on what each user will require. Tons of extra hardware into my hardware organizers that will come in handy down the road.
Makenzie –
I was pleasantly surprised by this mount! The packaging was wonderful; each component’s package had the part letter printed on it so that there was no guessing about what was what (see picture). I installed it alone and it was a little difficult, but things like this should be done with two people to make it go smoother. The instructions were clear and concise. If your TV’s horizontal VESA size is 200mm, you will not be able to center your tv on the mount itself because that is the smallest setting. I chose this mount knowing that was a possibility so that I could size up my TV in the future. The mount also comes with a paper version of the mounting board so you can mark where your holes will go, very helpful.
Jumm john –
This Tv mount is very durable. Every single component is made with heavy metal. Its a little heavy so when installing this make sure you have two people doing it so you don’t accidentally drop the mount. The kit comes with a pre-drilled piece of paper that you can place it on the wall to make sure you want to place it there. This was very helpful in having a precise measurement with the balancer. The downside of this mount is that there are so many spaces in between the TV and the wall. When pushed back there are about 8 inches of space which makes the TV bulky and doesn’t fit the room space sleekly. Also, this mount was priced very high compare to another mount, and I thought would be made with quality light material instead of using super heavy material that makes installing harder.
Madeline Randol –
This wall mount is the best I’ve ever used. Extremely sturdy even with a heavy 65″ TV. I have very unstable stone walls and I was able to use my own hardware to get into the walls. Didn’t use the given wall mount hardware which was expected, but there was plenty of it!! This thing is A1. Buy it. They even send you a carboard cutout template of the bracket so you can mark your holes without having to hold up the heavy bracket. Genius.
CA Hiker –
Really heavy duty feel and operation. I installed the unit on my 82″ Samsung and it did honestly droop a couple of times as I couldn’t get the plastic wing screw to hold the upper location firmly enough. I swapped the wing screws out for some hardened metric screws out of my KTM hardware kit and like magic the tv has been right on the money for at least a few months. Good to great product. Comparable to the $150 mounts that Costco sells. With a small tweak to the hardware it’s top notch.
Wayne Faligowski –
Very sturdy TV wall mount. Easy to install with the template included. Just put the template up on the wall, mark four holes to drill into the studs and mount the TV. Everything included, a variety of bolts and screws, a HDMI cable, even a level. Used to mount an 85″ Sony TV weighing 102 lbs, well within the 132 lb rating range for the mount.
HEBERTO DELGADO –
Easy to install. You do need to locate and use studs to guarantee a proper install.This bracket is holding up a 75lbs television with ease.The bracket allows you to push it agains the wall to get a relatively nice flat profile.Arm motion is ideal to get behind the TV.
Momma Bee –
Great range of motion. It can move in every direction very easily. My hubby hung it in minutes with ease. Our tv is 75′ and it holds it perfectly. No need to worry about sturdiness! It’s there for good! The box even came with a level. We immediately bought a second one for our bedroom.
Bri lynn –
We were missing parts unfortunately. It came with 3 out of the 4 volts to mount the bracket on the wall. We had to find a 4th bolt. Other than that, easy to install and works great!
Rudy B –
Good: replaced flat mount wall mount. Great motion range being stable when fully extended. Many options for making sure your TV is level even if your bracket is a little off kilter. Came with several tv bracket mounting screw sizes and spacers for any TV….. curved or flat and lag bolts for mounting the bracket to the wall. The bracket is smaller than the wall mount it replaced and because of the way the studs are spaced on my wall, the new bracket was over to the left over our fireplace. On the older bracket we were able slide the TV over to acommodate. With the new bracket, because of the way it retracts or extends out we just pushed it back a little to the side to center it above the fireplace and it’s still close to the wall when retracted. Great flexibility.Bad/annoying: Hand/thumb screw for tilt option had to be tightened with a tool so TV wouldn’t flop/tilt forward when moving the TV. No biggie, just make sure it’s real tight.Would recommend.
QBeing –
Did not have any of the issues the 1 star reviews gave, Had my instructions, had all the hardware, and many different sizes for the bolts. I have mounted it to the wall studs and it seems sturdy enough. The vesa pattern was a good match. But moving this TV is not a simple task. That has to do more with the TV Size than the hardware.So everything works, but mobility is limited. it mounts high on the TV so you have to attach it high. And to move the TV I always end up putting finger prints on the screen. I really need to go back and really tighten the adjustment for the angle tilt because it moves every time I move the TV. And the movement from left to right is really limited because it doesn’t come away from the wall enough to make a huge difference.So for the price, a good mount. But if you have a bigger TV you may want to keep looking. It works for an 82″ but since I end up not really moving it, it defeats the purpose of a movable mount.
Discount Dave –
It was easier to install than other mounts I’ve installed.Simple instructions with realistic photos.The stencil for where to put the holes was very useful and took out any guess work.
James Dean –
The mount isn’t bad at all BUT TAKE MY ADVICE!!! DO NOT MOUNT YOUR 65 INCH + tv at an angle as in pulled out and facing forward.. I did this for about a week and bent my tv… because it’s so heavy.. I have a 75 inch Samsung 7 series.. mount it as flat against the wall as you can… for big TVs the motion mounts IMO are kinda worthless because the sheer weight of the tv will bend it..
DFarmer –
I am very impressed with the quality material, thoughtful design, completeness and packaging of this wall mount kit. Very sturdy in use, easy and smooth to move. The tilt feature stays put after you tighten the thumb screw using pliers and tightening tha allen head screw on opposite side. The TV I mounted weighs 54lbs. I highly reccomend this mount, especially for this price!
Blake –
Bought a new 82″ TV to replace my 65″ and the old mount wasn’t rated for over 70″ so bought this mount. Considerably bigger than my previous mount and works great. All the hardware worked with my TV as well. Very pleased.
Jettamk2 –
i wasn’t sure of my ability to install this with a 65″ TV or how sturdy it would be, but I’m very happy with the end result. It was easy to install, and feels very secure and strong enough to support the weight.i’m happy with it.
SFloridaDad –
This was the first time I installed a wall mount and I was very happy with it. I liked that they give you a paper diagram for the mount how it will go on the wall. This helped me so much. Once you get the wall mount on the rest of the install is easy.
S. F. Brooks –
The install was easy. The included stiff mounting pattern templet was very helpful. I was able to place it and move it to find the best location without holding the component weight or smoothing out a flimsy paper templet. The mounting of the TV to the mount was very easy and is very secure when the final clamps are secured. I was very pleased with this unit and will buy another without question should I mount another TV.
MUSIC Critic –
Just got a new tv that’s bigger and heavier than my last one so I needed an upgrade to our wall support. Checked out Amazon and was impressed with the USX MOUNT Full Motion TV support reviews I decided to take a chance. This wall mount is easy to install and works perfectly.
RHL –
Our electrical outlet is centered above the fireplace, and is the only place we can plug in our new TV. Trouble is, this particular wall mount covers up the very center of the mounting area, exactly where a centered plug would be. So, there is no way to make it work in this case. The design should have accommodated this possibility, but it does not. Also, the photos don’t make it clear, so you’ll find it out the hard way.
Tamera Stephens –
Easy install with good instructions and a helpful marking template. Plenty of variety in screw/washer/spacer sized to fit different TVs. It seems very sturdy and the range of motion is all you could hope for and it moves with ease. I’m very happy with it and it couldn’t be better for the price.
Marissa –
We purchased these because we have two large tv’s and needed a good sturdy wall mount for them. So far, the one holding our 82′ has not had any issues, but the one that was holding our 65′ has failed. We ensured that the mount was placed correctly into studs and installed with the hardware that came with it. Within 1 week the mount completely came off the wall, dropping our 65′ tv and shattering it. We are now out over $1,000 for a tv and mount due to it failing.
morgan –
Easy to install, sturdy, and very good quality! Will be purchasing more for the other televisions we own. Worth every penny and far better than any mount we looked at in the store
jason mcleod –
This mound is fantastic. Super easy to install. I didn’t really need the tilt feature or the extendability. But wanted it to make it easier to plug-in components and it works like a charm. Pull out the TV plug-in all of your cords then push the TV back to the wall. I would suggest this mount For pretty much any application just for this reason no more struggling to plug-in your HDMI cords!
Christy K –
I’ve purchased and installed this mount 3 times already. I’ve used it to support a 70inch, 55 and 65 inch tv. Pretty simple to install and the range of motion is great.
Autumn chagnon –
Minor assembly required, simple enough with included tools. All hardware is also included, even the lag bolts to screw into wall. I went directly into a wooden plank wall in my den, so nothing else was needed, but if you were going into drywall, brick or concrete you may need to get the plastic anchor inserts. I didn’t need them, so I didn’t look for them in the package. There is plenty of hardware included, different size bolts, washers and spacers. Install took about 15-20min, organizing my wires and cables was another story all together. My own doing, as I’m very anal/OCD about that stuff. Used about 10 zip-ties and the only wire even visible is the 1 gray power wire from the outlet to the power strip 🙂
CW24 –
Why in the world do people buy mounts from big box stores? The markup is insane, and the quality isn’t there. This mount, however, is fantastic. Good value/price/install – everything. It’s holding our 65″ LED and has a great range of motion. With the mounting assembly, there are more than enough spaces to add a couple of extra lag bolts if you’re nervous about the hold.