Description
- Fit for 42″-70″ Flat Panel TV
- VESA: 100×100 / 100×200 / 150×150 / 200×100 / 200×200 / 200×300 / 200×400 / 300×200 / 300×300 / 400×200 / 400×300 / 400×400 / 600x400mm
- Kippwinkel: +0°/-8°
- Distance to the wall: 68-182mm (2.69-7.18″)
- Weight Capacity: 132 Pfund (60kg)
UNIVERSELLES DESIGN
This TV wall bracket fits most 42-70″ TVs up to 132 LBS, with VESA Size Available from 100*100 to 600*400mm.
RAUM SPAREN
The TV wall mount can get your TV as close as 2.69″ to the wall creating an instant low profile modern and professional look for your home and office.
EINSTELLBAR
Tilt angle +0/-8°, tilt your TV based on your position for a better view.
EINFACHE INSTALLATION
Einfache Installation dieser TV-Halterung an einem Holzbolzen oder einer Betonwand mit detaillierten Anweisungen, alle mitgelieferten vorbeschrifteten Hardware-Beutel (Hinweise können Ihnen helfen, zu unterscheiden, welche Schraube Sie verwenden sollten). Durch Ziehen von Gurten können Sie Ihren Fernseher leicht verriegeln und loslassen. Wenn Sie Betonanker benötigen, kontaktieren Sie uns bitte, um diese kostenlos zu erhalten. Diese werden aus den USA verschickt.
PRODUKT ENTHÄLT
Mit 6ft HDMI, Wasserwaage, 3 Stück Kabelbindern und allen Standard-Montageteilen, und 10 Jahren freundlicher Kundenservice in den USA.
Zusätzliche Information
| VESA | 100x100mm, 100x200mm, 150x150mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm |
|---|---|
| Maximum Loading Weight (lbs) | 132 |
47 Bewertungen für XTL018
Nur angemeldete Kunden, die dieses Produkt gekauft haben, dürfen eine Bewertung abgeben.
M.K.S Gandhi –
Easy to use, fast process and nicely documented.
HSR –
Nice mount easy to install, sturdy
Odell Joris –
This was my replacement for my 48 tv
Anastacia Cates –
First off, I have found that USX Mounts work very well and are extremely reasonable in price. I really appreciate their template and included hardware (including the small bubble level).
My only gripe is the small tilt adjusters on the back, since they have a small tab, with a small amount of space to tighten them – I’m not entirely sure mine are tight enough.
That said, the build quality is nice and assembly is easy. This particular mount holds our 65″ over the mantle very well and gives just enough adjustment for seating angles.
Mick –
This is so nice to be able to pull the tv straight out to connect things to the back. It seems very well made and I will be buying more when needed!
HonestReviews –
This holds my TCL 75″ TV without a problem. This replaces a low profile mount that was so close to the wall that I couldn’t get behind the TV to move cables around.
This mount can also remain fully extended and still support my TV no problem. I generally have the mount pushed up close to the wall, but I left it hyperextended for a few days after organizing cables behind the TV and I didn’t notice any bowing in the metal.
Given that this mount doesn’t sit as flush to the wall as my previous slim profile mount, I was worried that I would regret how the TV looks on the wall, but I like how it turned out.
A & M –
Good sturdy construction and very easy to install. We built an over mantle and needed to center the TV in the trim box. The previous mount was a solid plate without a cut out for the outlet. It was mounted under the outlet which made the TV to low. This mount has a cutout for the outlet in the middle of the bracket without sacrificing stability. Took out the old mount drilled a few new holes into studs and mounted the anchor plate on the wall and then adjusted the mounting arms on the TV until we had it centered. The little straps that you see hanging down in the product photos on line have little magnets on the end so once you get it installed you can keep them from hanging down by attaching them to the brackets out of site. Easy to find later and a little pressure releases the bottom bracket- tilt the bottom out and then lift the TV right off the mounting plate. Very easy to remove, tilt, and slides left and right on the mounting plate. Pulls away from the wall on scissor arms for easy access to plug in cables. Sits very close to the wall otherwise depending on how high you mount the TV and need to tilt it down for ease of viewing.
Dorian –
Nice and sturdy…holding older 70 pound tv no problem..could easily support more..movement is good..and does what is described giving room to access rear of tv..tilt holds position and rotates left to right just enough to change angle..of course the rotation will vary depending on your screen size. Price beats other similar mounts that offer same features.
Eric L. Orlinsky –
Glad I had it installed by a professional…accomplished in less than 30 minutes !
Bobby Lacur –
Typical mount installation, expands as well. Not that much, but enough. For the price it’s good.
Daniel B. McNeal –
Easy to set up and good instructions. I mounted a 65″ TV, they provided lag bolts (make sure you secure the mout to a wall stud), and the world’s smallest level (it’s kind of cool). The best advice is after you put the mounting bracket on the wall make sure it’s level, and pull down hard on the bracket with more weight than your tv weighs, so you know it is secure before mounting the tv.
Donnie Reid –
Nice mount
Ron Austin –
Very well built.
Kraig Kreitler –
Compared to the prices at the local big box tech store, this TV mount is amazing! I especially like the tilt & scissor mount allowing easy access behind the TV & fine tuning viewing angle. Aside from the price, this mount allows me to go from the 65″ I currently have, to an 85″ I plan to upgrade to. Seriously would buy this again for any TV I need to mount in the future.
Richard –
This mount worked great for my Samsung curved 65″ TV. The mounting template made for a really easy install.
Marc6131 –
It’s a good mount and I added the sound bar mount too. Works great
Man Man –
This TV mount works good and holds up pretty good too. The only pain in the butt was trying to get it leveled out but the mini level that comes with it was annoying. The level would fall off the mount since its not magnetic but other than that it’s perfect. Also it extents out so getting behind it isn’t a pain in the butt to work with I highly recommend this for the price and sturdiness and this is holding a 75in.
mtmcgaugh –
This mount is so easy to install and is really nice. The build quality is excellent and I love the telescoping feature.
Dave Y. –
Came with everything I needed. Good instructions. Got it for less than half the cost of what you find at the big home improvement stores.
Amazon Customer –
Fácil instalación
John L. Sullivan –
Easy to following instructions, all the pieces were there, individually packaged. Easy to install, placing a 65 inch took two people
Antanion –
Does all I need it to do. Easy install.
Ken E –
Well made and it gives you room to make hookups easier
Justin –
This product fit my tight location with 24” studs so I’m very pleased with entire transaction
Bryan Szychowski –
Item was easy to install and worked as planned
Sircuit Boi –
No complaints here.
BK91 –
I thought the latches that hold the tv to the mount were sketchy at first but they turned out to be very sturdy. Installed in 24 inch steel studs for a 65 inch tv. It looks great!
Dan Yeagley –
Quick delivery. Filled our need.
John Szarejko –
If you have a large tv (55in or larger) this mount allows you to easily get behind the tv to access wall outlets and tv inputs/outputs. Installation is the same as any other wall mount though if you are installing on a shallow wall with 2×2 studs the included lag bolts will be too long. It’s constructed well and after a month of use my tv hasn’t fallen off the wall so that’s a plus. Those wanting to flush mount their tv should look elsewhere as this one has about a 2in gap between the wall and tv.
Leonard Walton –
One of the best mounts for the money