Description
- Fits for 37″-70″ Flat Panel TV
- VESA: 150×150 / 200×100 / 200×200 / 200×300 / 300×200 / 300×300 / 400×200 / 400×300 / 400×400 / 600x400mm
- Tilt: +30°/-30°
- Distance to the wall: 28mm (1.1″)
- Weight Capacity: 132 lbs (60kg)
UNIVERSAL DESIGN
This TV mount fits most 37-70″ TVs up to 132lbs, Mount VESA 150x150mm Up to 600x400mm available.
SAVING SPACE
This TV bracket can get your TV as close as 1.1″ to the wall creating a low profile modern and professional look for your home and office.
EASY INSTALLATION
Pulling straps can help you easily lock and release your TV. If you need concrete anchors, please contact us to get it for free which will be sent from USA.
DIVERSE WALL MOUNT CAPABILITY
Easy to install this TV wall bracket on wood stud or concrete wall with detailed instruction. Do not install it on dry wall alone.
WHAT YOU CAN GET
Come with bubble level, 3 pieces pack of cable ties all mounting hardware in pre-labelled bags for your easy distinguish. US-Based customer service is always ready to help.
Yani Galvez –
Easy to install
Redrose507 –
Had installed in under 20 minutes. Just make sure there is at least one stud to anchor to. The home builder of my house used metal studs so I had to get compatible hardware. I used 75lbs drywall ancors on the attachment points with no studs and large metal lag screws into the steel studs. Worked great.
cbhunt –
This turned out to be a well-designed, sturdy TV wall mount that was perfect for mounting my 32″ TV to a wall with 16″ on-center wall studs. The mount came with all the necessary screws, washers, spacers, and even a bubble level. The instructions were easy to follow. Great value for a small, high-quality TV wall mount. Highly recommended if you have a smaller TV that you are mounting to a wall with 16″ on-center wall studs.
Southplank –
This is a simple strong mount with a good selection of hardware. Keeps the tv very close to the wall. You get a little leeway up or down in the tv brackets by choosing different holes, not too much though, so measure carefully. After mounting the brackets to the tv, you can temporarily snap on the frame and hold everything up to the wall so you know how high the tv will be before drilling. You will get about 6″ of movement left or right of center once installed. Make sure you have a stud finder (for drywall), a level, and a drill. Use a 1/2″ socket and ratchet for a quick install. Don’t use an adjustable. Figure on spending about 20 minutes thinking about it and 15 minutes to actually install this.
Allan Szast –
I needed to mount two tvs on the wall. Most of the mounts I looked at were over-priced and poorly made. These are of reasonable quality and extremely easy to install. Only one caveat, the instructions neglected to tell you that the straps on the uprights face down as they are the releases when you want to remove the unit.
Jkdmo –
Easy to install, sturdy, and easy to mount the tv. The pull cords make it easy to take the tv off as well as giving an audible click so you know it’s secured. As good as similar mounts at Best Buy that cost 3x as much.
Abel –
Great price
Maxxx Designs –
This mount is quality for the price. When it was all put together it felt sturdy.As someone with enough experience making measurements and doing some drilling this wasn’t so challenging to get working but I don’t imagine it would be so easy for everyone. The instructions were a bit annoying to follow, I don’t know how to describe why I feel that way.I don’t like that the straps hang visibly below the TV, I wish that part was more hidden. How often are you really going to be removing the TV from its mount using those straps? Once a year? They should be tucked away somehow.Overall, I’m very happy with the product. It has a great price and saves space over having a TV cabinet. This is a good buy.
Rebale 111 –
Holding my 65″ 52 pound vizio perfect
Malavika –
A must need if you wanna wall mount
4014BB –
Included hardware that worked with my TV
tonya –
Perfect
Katharine A. Rundle –
Strong and stabile
Laurenkal H. –
TV still on the wall
GCL –
Works for my 65″
P. stone –
Strong and easy to install
Rebale 111 –
Product was real lite, like others, i wondered before installing. Was easy to install, had good strong screws, could install to studs or block wall. You will need a level and stud finder. My TV has been mounted 2 weeks now. Product was excellent price. Would buy again.
Amazon Customer –
it works
Amazon Customer –
Tv mounting bracket
riddler –
Easy install, does what it should.
Pj Burton –
Sturdy!
Monica –
Good bracket for the money
Teutonik –
Good bang for Buck
Walney Costa –
Piece of cake to install
C.H. –
Sturdy well built, and customer service is great
Teutonik –
I’ve wallmounted a TV before, but it has been a few years. That was a 40″ Westinghouse, now I was mounting a 65″ TCL, very different. The details in TV’s manual how to wallmount were non-existent! I had to trust the wallmount I pick would have all I need, and more. Some sell for 11-12$, this one I got for $17. It came with all I need, lots of difference size screws and spacers, and good instructions. What you do need yourself is a drill, tape measure, pencil, adjustable/monkey wrench or rachet, Stud Finder, a level (or phone app) and always a bit of luck. First add the two verticle back brackets to the TV. Can use (included) two longer screws + spaces at top of TV, and two shorter ones at the bottom, to create a downward angel to help viewing a mounted TV. This mount does not allow for adjustable up/down tilting, so this is how you created a fixed tilt. Then CAREFULLY pick wall location with stud-finder, makign sure the wallmounted brace will reach two neighboring studs. Doesn’t matter as muuch to get the left/right location exact, because once TV is mounted it can slide a bit left/right, but you MUST get the height corret, or you’ll have to drill again. Mark roughly with pencil upper and lower drill sites for both studs, drill one and screw in one of the included wall screws (with washer) just enough to keep wall brace hanging, use the level to make sure wall brace is level before drilling and screwing in sites 2-4. It can be hard to tighten the screws all the in due to the raises edges the TV’s brackets fit into, so you can use the included short spaces if you want, I did this, but if you want to be able to slide the TV a little left/right as need, make sure scree head stays same/less raised that the track the TV hangs into. Once wall brace is in place with all 4 tightened screws, lift into place the TV, encuring both bottom connections lock into place (has a pull on release if you need to later take TV down. Thope this helps!
Pam –
Very easy to install, simple instructions, hardware well organized in package. Included were several spacers that can be combined if needed depending on the construction of the television. We used this for our new 70 inch TV. Bracket looks very small compared to TV, but it fit perfectly onto the back. Seems to be sturdy….the tv has been on the wall all day and hasn’t fallen yet! Very satisfied with this product.
Mike Teezy –
I’ve bought a lot of wall mounts over the years. I’ve spent up to $99 for mounts but typically around $20-$30 for ‘a good one’. This mount was the cheapest price I ever paid so I didn’t know what to expect. I was surprised and how well this mount is made. Very sturdy and Well made. Terrific value! I trust it to hold my 55′ smart TV.
Amazon Customer –
Tv mounting bracketn
Amazon Customer –
it worksn