Description
- Passend für 10"-26" Flachbildfernseher
- VESA: 50×50 / 75×75 / 100x100mm
- Tilt: 5°/-15°
- Swivel: ±90°
- Distance to the wall: 61-325mm (2.4”-12.83”)
- Weight Capacity: 33lbs (15kg)
HEAVY DUTY TV MOUNT
RV full motion TV mount fits for most 10-26 inch TVs up to 33 lbs., with VESA/mounting holes spacing from 50x50mm to 100x100mm,. Please check you TV VESA size, TV weight before order. This mount was made in highly steel makes whole unit sturdy and safe.
UNIQUE ONE STEP LOCK MECHANISM
RV mount with unique locking mechanism with 20mm tongue secures and then fixed swivel arms and TV plate at that time when the vehicle is in motion to prevent any bumps. One-step safety locking system helps you better release and lock the TV in place securely with the pulling strap. Spring latch of RV TV mount can help use more easy on Locking mechanism and stop creaking on your trip.
EINFACHE INSTALLATION
RV TV wall mount with quick installation design,when you hang and secure TV to wall plate. The Package contains clear instruction and all included hardware in pre-printing number bags. The wooden board in the vehicle should be thicker than 1/2 inch. +/-5 degrees post-installation adjustment allows
ADJUST FOR OPTIMAL VIEWING
This Articaulating RV TV mount Tilts +5°/-15°,swivels+/-90°ï¼ˆTips : Swivel angle depends on your TV size)
PRODUKT ENTHÄLT
Come with bubble level, 3 pieces pack of cable ties and all standard mounting hardware (â–ºTV Screws: M4*12mm 4pcs, M4*30mm 4pcs, M5*12mm 4pcs, M5*30mm 4pcs, M6*12mm, M6*35mm. â–ºSpacers: M6*17mm 4pcs, 2.5mm 4pcs. â–ºWashers: M4 4pcs, M6 4pcs.), 10-year friendly US-based customer service.
DanE50 –
Very sturdy, well-built item which I used to mount TV in Travel Trailer. Locks securely to wall for travel but articulates to address all viewing positions.
David VanBurkleo –
Ease of installation
Raine405 –
Easy installation. Fit multiple tv sizes.
jane beminio –
It fit and worked well.
Christine In Florida –
Perfect for the new 24 in tv I wanted to put on the wall in the bedroom of my travel trailer. Feels solid and no worries about tv falling. Easy install and will buy another for the bunkroom.
J. P. –
Works perfectly for my TV in my tiny homebuilt camper. Easy to Install and locks the TV securely for travel. When not locked, it has alot of positions the TV can go it. Highly recommend.
Roger B. Lee –
Perfect size mount for small TV in camping trailer.
Matt H –
Holds our TV in the travel trailer very well .. so far have had to issues ..
Jim K –
Has a few mounting holes to find a stud. Fit the small TV fine.
The tilt feature was nice for the RV because the bedroom TV is higher, now it points at the headrest.
The lock is fussy but works while traveling.
Carol C. –
Got these to install our tv in our bedroom in the new camper easiest mount I have ever installed! I even bought a second one to install in the kids room!
Nick White –
This mount works pretty good. It folds up and locks to keep tv from moving while towing an RV. The mount is 100×100 and recommended up to 26” TV’s. This worked out perfect in my bunkhouse.
anonymous –
This works much better than the tv mount than came with m travel trailer. I wish it sticks out a little bit more to clear the cornis on my window so that I can use the locking mechanism when moving the trailer. I also will not be able to remove and mount the tv to the outside mount without removing the tv from the mount. However, its give me more ways to set up the tv for my viewing pleasure inside the trailer.
Amazon Customer –
bought for my camper but did not fit the tv without modifing
chris –
Well made
M. Paradise –
Great addition/upgrade for our boat tv. Holds it securely while we sail.
Wade Livingston –
Reasonable price and worked great in a tight space.
Lee St Clair –
very well made unit
Amazon Customer –
Installed in a camper, locks down and works great.
G. H. –
I bought it because it a) looked good on the picture and b) because it had more than one screw hole on the top, which I was sure I’ll need because I would not hit a stud in the wall and a single screw would not be enough. And it turned out well, super robust. I was a bit lucky with the adjustment though, and it turned out straight, but keep in mind that the mount does not support rotation, so all you can use to align rotation is the play in the screw holes, before you tighten them down.
Erin McCullough –
Very easy to install, took me less than 30 minutes start to finish. I love that it has a significant tilt adjustment since it seems that all RV television mount plates are by the ceiling. It has a very slim profile so we had plenty of clearance for our slides. It also has a locking pin to keep the tv from moving while you drive. We will order another for our other tv mount soon!
Barbara –
I ordered this wall mount for the TV I have in my RV / small 24″ had to install a back board first then assemble the mount. Easy instructions, very well made / PERFECT for what I needed.
snooker –
I got this for our RV because of the latching mechanism. Problem is you cannot slam latch it, you have to pull the release pin, push the tv in, and then release the latch. That might be workable but the pin does not always fully extend and it is only partially engaged. And because the TV is in the way it is impossible to see the mechanism. I sent it back and got the Mounting Dream brand because it has a great slam latch that is sloped and the spring is strong enough to always engage fully.
Code 3 –
Very happy it came with smaller stud screws as well as the normal lag screws. In an RV, you don’t want to go through the back side of the wall, so I’m happy this came with smaller lag screws for my situation.
Devin –
For the price this is one of the strongest tv mounts I have bought. Very sturdy.
Mike H. –
Works as designed and is perfect for use in limited wall spaces. I would recommend this wall mount to my friends.
R L G –
Sturdy. Good range of motion.